Door & Entryway Spray Finishing
Your front door is the one surface every visitor looks at from three feet away. We spray it to a factory-smooth finish — including sidelights, transoms, jambs and casing.
Learn moreSprayed front doors and entryways, cabinet refinishing, and full-service painting — done with the prep work that makes a finish last, and the scheduling discipline that gets us out of your house on time.
Most of a paint job is what happens before the colour goes on. We sand, fill, degloss and prime properly, and we spray the surfaces that deserve to be sprayed — doors, cabinets, trim — so the finish lays down flat with no brush marks and no roller stipple.
You get a written estimate within one business day of the walkthrough. Most single-door projects are finished in a day; a standard kitchen refinish runs about a week. You get the schedule up front, and we hold to it.
One person owns your project from the estimate to the final walkthrough, so you are never re-explaining yourself. We show up when we said we would, protect your floors and furniture, and clean up at the end of every day — not just the last one.
We take on complete interior and exterior painting, but the work we are known for is the detailed finishing that most crews would rather skip.
Your front door is the one surface every visitor looks at from three feet away. We spray it to a factory-smooth finish — including sidelights, transoms, jambs and casing.
Learn moreA sprayed cabinet finish for a fraction of what replacement costs, with doors finished off-site and hardware, hinges and layout kept exactly as they were.
Learn moreWalls, ceilings, trim and doors. Full masking, proper cut lines, and floors that are covered before the first can is opened.
Learn moreWisconsin weather finds every gap. We wash, scrape, prime bare wood and re-caulk the joints that actually matter before we paint.
Learn moreNail pops, settling cracks, water damage and old texture that needs matching. Repaired so the patch disappears once it is painted.
Learn moreFurniture, built-ins, mantels, handrails and millwork — stained or painted, with a clear topcoat built up in thin sprayed passes.
Learn moreA brushed door shows every stroke once the afternoon light hits it at an angle. A sprayed door does not. Drag the handle to see the same door before and after refinishing.
Nobody enjoys having their house turned into a job site. The point of a fixed process is that you always know what is happening next and when we will be finished.
We look at the actual surfaces, talk through sheen and colour, and flag anything — failing caulk, soft trim, old texture — that will affect the result.
An itemised, fixed-price estimate showing exactly what is included, what products we will use, and the start and finish dates. No hourly surprises.
Floors covered, furniture moved and wrapped, hardware removed and bagged. Repairs, sanding and priming happen before a single finish coat.
We spray or roll the finish coats, then walk the job with you. Anything you are not happy with gets corrected before we invoice.
Our shop is in Glendale, which puts most of the North Shore within a fifteen-minute drive. That matters more than it sounds: short travel means we can get a door sprayed, come back the same afternoon to check it, and keep multi-day projects moving instead of stalling.
We take work throughout greater Milwaukee. If you are outside these suburbs, call and ask — we will tell you honestly whether we are the right fit.
Call (715) 892-8068 and ask. If we are not the right crew for your job, we would rather say so than waste your time.
Send a photo of your door, your cabinets, or the room you are tired of looking at. We will come out, take a proper look, and put a fixed price in writing — at no cost to you.
(715) 892-8068